Construction Lights, light towers, Lighting For Traffic

Best Tips to Make Temporary Construction Lights Work for You

Having proper construction light is important. When you are working in a construction zone and dealing with a variety of tasks, it’s vital that there is sufficient lighting and not just for yourself but for others. What is more, it can be safer to have lights when you work otherwise accidents can happen. It’s not going to be fun or appealing to work under these conditions so it’s best to ensure the right lighting is set up. However, how can you make the temporary lights work for your construction zone?

Set Them up So Sufficient Lighting Hits the Areas Being Worked On

Would you find it more useful to have the lights focused on an area you weren’t working on or an area in which you were working on? These are the things you have to think about in order to make the temporary construction lights work for you. If they are focused on the wrong areas then no-one is going to be able to get sufficient lighting. What is more, it might be unsafe to carry out the work too so it’s even more important to ensure the lights are set up properly. You want to try and cover as much of the construction ground as possible so ensure they are focusing on the areas which are in use or which will be throughout the upcoming hours.

Ensure the Lights Are Safe Where They Stand

Where have you put the lights? Are they safely out the way of construction vehicles or are they positioned somewhere in which you can knock them over? Despite what you might think, it’s very easy to accidentally knock over temporary lighting and it can cause a lot of problems too. Instead, you want to ensure the construction light or lights are placed in certain locations which are safe and not easy to get to. This will make all the difference today and really it’ll help you avoid trouble and accidents happening. More details here: http://www.thebiotron.ca/overview-savings-led-construction-lights-used-rtg-cranes/

Plan Ahead Over Lighting and Construction Work

When you know construction work is going to take place you have to ensure your temporary construction lights are located perfectly. You don’t want to place them in zones which might prove dangerous and you don’t have to keep moving them every so often as well. That is why you absolutely have to ensure the lights are planned out in terms of where they’ll stand. This will make your job a lot easier and in reality it can be easier for your construction work too.

Make Your Lighting Work for You

When you have construction work going on, you have to ensure there is sufficient lighting to keep people safe and to make the job go quicker. Without lighting, things are going to be made far tougher and it’s not what you want. However, with some careful thinking you can easily get the lighting set up and working for you. Have your construction light carefully placed and hopefully there will be enough light for the task ahead.

led construction lights
Construction Lights

Overview of Savings for LED Construction Lights Used on RTG Cranes

LED Construction Lights

On construction sites, cranes use numerous lights for safety and illumination. Just how much lighting does a crane require during operation?

A heavy-duty rubber tyred gantry (RTG) crane, which is commonly found in shipyards and ports that hold or stack containers, uses around 14 different lights on a regular basis. These units range from obstruction lights for pedestrian safety to floodlights located on the stacking carrier to illuminate containers during lifting maneuvers.

Operating Costs and Savings

Previously, RTG cranes utilized metal halide lamps for illumination. Although bright, the lights were inefficient and costly for operators. Now construction businesses are transitioning to LEDs, in order to address pitfalls associated with traditional metal halide lamps.

Switching to LEDs can save RTG crane operators up to $5,000 per year (per crane), according to a Milwaukee-based company that specializes in the port crane market. When spread over a fleet of RTG cranes, the savings are enormous. For instance, a fleet of 100 RTG cranes outfitted with LEDs provide $500,000 in savings per year.

Expected Lifespans of LEDs

One of the main reasons LEDs perform exceptionally well on construction sites is due to their extended lifespans. In controlled, ideal environments, LED chips can last up to 100,000+ hours. Most LED lights offer an average lifespan of 50,000+ hours, as the units are rarely installed in locations that are perfectly suitable for the lights. In most cases, the fixtures are exposed to vibrations, water and extreme temperatures. RTG crane operators who use LED lighting systems around 12 hours per day can expect them to last 10+ years.

After its intended lifespan, LEDs will continue to provide illumination. This phase of the luminary’s lifespan typically comes with decreased output. However, unlike metal halide lamps, LED construction lights for cranes may continue to operate more reliably, displaying less issues related to color temperature, flickering and discoloring.

polycarbonate
Construction Lights

What is Polycarbonate and why is it used for commercial lighting

Traditionally, lighting manufacturers used thick glass to protect the sensitive components of luminaries. Benefiting from its transparent features, the material allows ample amounts of light to pass through for illumination. However, as we all know, glass is breakable. For rugged work environments, like construction sites, operators need something more sturdy and reliable. Because of this, engineers began incorporating polycarbonate into their designs. The amorphous thermoplastic, which can also be transparent or colored (depending on its intended application), is capable of withstanding rough impacts with minimal degradation over long periods of use.

Properties and Characteristics

Compared to ABS, PVC and acrylic, polycarbonate offers higher impact strength ratings. Furthermore, working with the material is considerably easier, with less wastage during formation. Minor bends can be performed without the application of high heat.

Polycarbonate can withstand temperatures up to 155 degrees Celsius. At this threshold, the material turns into liquid. It is important to highlight that the thermoplastic can be heated and cooled several times without sacrificing durability or performance. By comparison, thermoset plastics should only be heated up once, typically when injection molding is performed. A chemical change on a molecular level prevents the reversal of the material. Exposing thermoset plastics to a second wave of high heat will cause it to burn.

Heavy-duty Applications

Based on the benefits and characteristics of polycarbonate, it is possible understand how the material is being used to improve heavy-duty hazardous area lighting systems. Serving as a protective barrier, it prevents harsh impacts, vibrations and foreign contaminants from damaging luminaries. Moreover, the thermoplastic can be molded to create the housing of unit, resulting in sturdy, lightweight benefits.

These days, lighting companies incorporate polycarbonate in compact luminaries to reduce manufacturing costs, unwanted weight and component failure by forgoing the need to install secondary lenses. The thermoplastic is also highly resistant to ignition.

lighting systems
Construction Lights

How Does Fog Affect Lighting Systems in Construction Sites

Unpredictable weather, such as rain and snow, can negatively affect outdoor lighting systems operations at construction sites. When it comes to fog, the ability to gauge distances between two objects or structures is notably reduced.

Find out how industrial lighting systems at the facility can address such issues and promote safety for workers handling heavy machinery.

The Effects of Fog

Fog consists of millions of tiny water particles, suspended in the air. Because light beams move slowly through various mediums, the way images are depicted by our eyes is affected. As light hits a small water particle, it slows down and switches the trajectory or angle it is traveling in. Since there are literally millions of water particles in a foggy location, this phenomenon occurs at an exponential rate.

As a result, the creation of rings around light sources, such as light towers or large metal halide lamps, occurs. This makes light appear fuzzy and less saturated. It’s important to point out that one isn’t actually seeing more light. Instead, diffused light conditions are created, using the same amount of light. For workers, the presence of fog can make speed difficult to calculate. Because objects around the construction site are unclear, the basis of calculation, which is used to determine the speed of one’s movements, is unreliable.

During times of poor visibility, individuals may be plagued by the “Mandelbaum Effect.” This occurs when the eye is unable to focus on objects at certain distances, resulting in blurry vision.

Lighting Systems for Improving Visibility

To improve visibility in foggy construction sites, powerful lighting systems must be used. A combination of spot and flood lights are suitable for cutting through thick fog. Spot lights, typically used for long-distance illumination, offer concentrated beams that can pierce through small water particles, without appearing fuzzy. Although the distance of the spot light beam is hindered in foggy conditions, nearby illumination is clear and comprehensive.

Construction Lights - The benefits
Construction Lights

Construction Lights – The benefits

Many people already know about the benefits of using LED lights in their respective homes. And one of the benefits is the economic benefit in terms of using energy effectively and as a better green solution for saving money. Many are also aware that LED lighting solutions can last for a long period. click here for related information.

LED lighting have a number of advantages, especially when it is utilize in working environments. Here are few of the reasons why construction lights could be an excellent solution to many working areas such as offices, construction sites and also in the sports field.

  1. Cost-saving benefits. This is needed to be mentioned as one of the biggest benefits an individual or business people have can have upon buying construction lighting. The LED products aims to achieve for maximum effectiveness in terms of money matters. It will fulfil the needs of every company in making the most out of their budgets.
  2. It boasts an exceptional high-quality performance. This benefit is such a great opportunity to use as a solution for all big companies. While other energy saving lightings solutions may take for a moment to warm it up, the LED lights provide a bright light quickly. This could be very useful in an environment which requires brighter lit spaces for work to be carried out right away safely and more effectively.
  3. Energy-saving alternatives. The CFL will actually decrease the quality of light over time if frequently used. But even if CFL remains so reliable to users as an energy-saving solutions, it is still not efficient as using GU10 spotlight and or shall we say the LED floodlight having PIR to both on which will retain its brightness during the final day on their total life span as what it expects the start of its installation.

Factories, production lines, office spaces, workshops, studious, and the rest of the areas where the workers need to look for the exact detail were all just the specific workplaces which can benefit from this kind of aspects in using LEDs. for further details, click on : http://www.fhtimes.com/news/local_news/construction-to-disrupt-avenue-lighting/article_b7acb5e2-212b-11e7-8ab8-cf9b482f1fec.html

Construction Lights - The benefits

  1. Exceptionally flexible. There is a tremendous scope of various LED lights available these days, running from spotlights for lighting workplaces to the LED floodlight with PIR which can enlighten the largest of spaces.

Along these lines,there is no compelling reason to blend and match lighting arrangements with regards to LED. This one innovation can satisfy the requirements of for all intents and purposes every workplace. The best individuals to prompt which arrangement is most reasonable for your workplace are vitality sparing lighting authorities, a large number of which can be discovered on the web.

All in all, LED lighting is great for the home, as well as conveys various advantages to different working environments. An adaptable arrangement, this sort of lighting will perform well in both indoor and open air spaces, and even in the hardest-to-see workplaces.

Construction Lights

4 Cheap construction Light That Can Work Wonders

 

Lighting is one of the most efficient ways to keep production value high all the time. There are 4 construction light described below that if used will not only light your film beautifully but also add on a minuscule budget.

Filmmakers rent or buy standard construction light kit for their production.There so many types of lighting that can be used in filmmaking. The construction light kits are reliable and versatile, cheap and may be used in simple production. The modern day lighting system unlike traditional lighting kits, construction light can be bought at places such as Home Depot. Often sold at a fraction of the cost offilm lights,

So if you are looking to save a few bucks on your next production, or just want to try something new and different – these construction lights are for you:

  1. Work Lights

These versatile construction lights can be bought at just about any local hardware store at budget cost. They are the best considering the amount of power they generate. Work lights offer some of the best bangs for your cash on the market. The lights come with tungsten and daylight balanced bulbs. They are extremely versatile, and their stable power output makes them the best option in the market. If you are demanding lighting situation with a night exteriors, you got your choice.

The construction lights have been used in countless films as well as large scale production such as Fight Club. Consider these lighting for your DPS on a budget.

  1. Clamp Flood Lights

This Temporary Construction Lights have been used for decades in filmmaking. In recent times photographers on a budget tend to choose Temporary Construction Lights. Clamp flood lights are very cheap and can be bought at your local hardware store. They are more of Construction Lights offering great solutions for inexpensive high power output.

A single lamp as a high key or add diffusion to it if you prefer that. You can combine multiple lights to illuminate and the entire set or construction room. The main reason this lighting have been used for many years is their price and lighting they offer.

  1. Energizer LED Folding Area Lantern

This type of lighting panel is among the new Construction Lights available on the market.  Although mostly used for camping, they are the best for small construction as a means to light up an entirely dark area at night.  Little lighting panels are well suited for use in a film set.

You will find them to give the same aesthetic to shooting with regular LED panels or at times even fluorescent Kinos.

The final thought:

When approaching any lighting setup for any construction project, don’t choose one thinking one size all fits approach. Consider what the stylistic and creative need for your project. The course what your vision is for the overall aesthetic. With that, you can choose one of the best construction lights in a way that us unique and specific to your project. Click here !