Construction Lights, light towers, Lighting For Traffic

Best Tips to Make Temporary Construction Lights Work for You

Having proper construction light is important. When you are working in a construction zone and dealing with a variety of tasks, it’s vital that there is sufficient lighting and not just for yourself but for others. What is more, it can be safer to have lights when you work otherwise accidents can happen. It’s not going to be fun or appealing to work under these conditions so it’s best to ensure the right lighting is set up. However, how can you make the temporary lights work for your construction zone?

Set Them up So Sufficient Lighting Hits the Areas Being Worked On

Would you find it more useful to have the lights focused on an area you weren’t working on or an area in which you were working on? These are the things you have to think about in order to make the temporary construction lights work for you. If they are focused on the wrong areas then no-one is going to be able to get sufficient lighting. What is more, it might be unsafe to carry out the work too so it’s even more important to ensure the lights are set up properly. You want to try and cover as much of the construction ground as possible so ensure they are focusing on the areas which are in use or which will be throughout the upcoming hours.

Ensure the Lights Are Safe Where They Stand

Where have you put the lights? Are they safely out the way of construction vehicles or are they positioned somewhere in which you can knock them over? Despite what you might think, it’s very easy to accidentally knock over temporary lighting and it can cause a lot of problems too. Instead, you want to ensure the construction light or lights are placed in certain locations which are safe and not easy to get to. This will make all the difference today and really it’ll help you avoid trouble and accidents happening. More details here: http://www.thebiotron.ca/overview-savings-led-construction-lights-used-rtg-cranes/

Plan Ahead Over Lighting and Construction Work

When you know construction work is going to take place you have to ensure your temporary construction lights are located perfectly. You don’t want to place them in zones which might prove dangerous and you don’t have to keep moving them every so often as well. That is why you absolutely have to ensure the lights are planned out in terms of where they’ll stand. This will make your job a lot easier and in reality it can be easier for your construction work too.

Make Your Lighting Work for You

When you have construction work going on, you have to ensure there is sufficient lighting to keep people safe and to make the job go quicker. Without lighting, things are going to be made far tougher and it’s not what you want. However, with some careful thinking you can easily get the lighting set up and working for you. Have your construction light carefully placed and hopefully there will be enough light for the task ahead.

larson light tower
light towers

LED Light Towers vs Metal Halide Light Towers for Construction Sites

LED light towers for construction sites come in numerous forms and sizes. For large-scale projects, most rely on massive light towers. These units are capable of reaching heights between 8-60 feet, depending on the needs of the business. Moreover, the light masts can be equipped with generators for a fully remote solution to power management.

When it comes to lighting technologies, today’s light towers usually incorporate LED lights or metal halide lamps. Both luminaries are capable of illuminating large spaces in a flood beam configuration. This article provides information surrounding the difference and similarities between LED light masts and metal halide towers.

led light towers

LED Lights and Masts

Light towers that incorporate LED technology consume far less energy than metal halide variants – up to 70 percent less. This is a major factor in construction sites, because the nascent phases of building usually lack electrical infrastructure. Relying on limited power sources for long periods of time can be costly, which is why the adoption of energy-efficient LED light towers have increased in the past five years.

LED lights for construction also come with longer lifespans – in some cases, double the lifecycle of metal halide lamps. They are more compact and are capable of withstanding rough environments and treatment often associated with construction sites. Toggling is another feature that make LEDs suitable for temporary lighting. No time is wasted and workers can start on the project with minimal preparation.

Metal Halide Light Towers

Metal halide light masts are capable of dishing out serious lighting on construction sites. Although fragile, the units were previously top choices for businesses in the construction sector. Compared to LED lights, they require a ballast to start the lamp and regulate its power. This extra component is prone to breakage and is another point of failure to take into consideration.

For extreme environments, ballasts are usually installed remotely, away from the lamp heads in order to keep them well protected. As mentioned earlier, when it comes to lifespans, metal halide units provide roughly 25,000+ hours of illumination. They are also subject to a warm-up period, when turning on the lamp.

To conclude, LED light towers are the next step in the evolution of industrial luminaries for construction sites. Metal halide lamps simply cannot compete with the benefits that LED lights bring to the table. From a cost, safety and long-term perspective, LED masts address all of the critical requirements for reliable, rugged lighting in large-scale construction projects.

Larson Electronics s a US manufacturer that provides wide selection of customized LED Light Towers.