lighting systems
Lighting For Traffic

FHWA Lighting Systems Recommendations for Roadways and Temporary Work Zones

The Federal Highway Administration (FHWA) oversees the wide-scale implementation of lighting systems for streets, road construction, temporary work zones and railroad crossings across the US.

When it comes to work zones, defined as a non-permanent work site that takes place on the road or close to it, the guidelines set forth by the agency provide several tips for improving illumination and safety.

Illuminance Levels

Due to the presence of pedestrians and drivers around public work zones, operators cannot deploy extremely bright fixtures at the site. Furthermore, certain lighting systems, such as light towers, should not be pointed at angles exceeding 65 degrees. Failing to adhere to this recommendation may cause unwanted light spillage, resulting in the creation of glare or blinding (when light beams are directed at passing cars).

For dangerous and detailed tasks, including pothole filling, 216 lux of illumination is recommended by the FHWA. Moderately complex works, such as paving or milling, should be supplemented with a light source that is capable of providing 108 lux. Low-risk tasks, which includes sweeping, surveying and deployment of construction equipment, require at least 54 lux of illumination for temporary work zones.

Conditions for Non-Permanent Road Lighting

According to the FHWA, certain conditions must be met in order to validate the use of temporary lighting systems on roads. When fixed, existing lighting structures are not working or must be removed to make room for the task, regulators recommend deploying temporary fixtures.

Moreover, when safety barriers and pylons are obstructed, lamps should be utilized to illuminate the section of the road. In most cases, one can find temporary lighting systems at non-permanent roadway projects that are supplemented with detours. The fixtures are usually directed at signs and dangerous sections of the work zone. For comprehensive illumination, the FHWA recommends the use of portable light towers which can be found here http://www.larsonelectronics.com/c-189-light-towers.aspx

Construction Lights, light towers, Lighting For Traffic

Best Tips to Make Temporary Construction Lights Work for You

Having proper construction light is important. When you are working in a construction zone and dealing with a variety of tasks, it’s vital that there is sufficient lighting and not just for yourself but for others. What is more, it can be safer to have lights when you work otherwise accidents can happen. It’s not going to be fun or appealing to work under these conditions so it’s best to ensure the right lighting is set up. However, how can you make the temporary lights work for your construction zone?

Set Them up So Sufficient Lighting Hits the Areas Being Worked On

Would you find it more useful to have the lights focused on an area you weren’t working on or an area in which you were working on? These are the things you have to think about in order to make the temporary construction lights work for you. If they are focused on the wrong areas then no-one is going to be able to get sufficient lighting. What is more, it might be unsafe to carry out the work too so it’s even more important to ensure the lights are set up properly. You want to try and cover as much of the construction ground as possible so ensure they are focusing on the areas which are in use or which will be throughout the upcoming hours.

Ensure the Lights Are Safe Where They Stand

Where have you put the lights? Are they safely out the way of construction vehicles or are they positioned somewhere in which you can knock them over? Despite what you might think, it’s very easy to accidentally knock over temporary lighting and it can cause a lot of problems too. Instead, you want to ensure the construction light or lights are placed in certain locations which are safe and not easy to get to. This will make all the difference today and really it’ll help you avoid trouble and accidents happening. More details here: http://www.thebiotron.ca/overview-savings-led-construction-lights-used-rtg-cranes/

Plan Ahead Over Lighting and Construction Work

When you know construction work is going to take place you have to ensure your temporary construction lights are located perfectly. You don’t want to place them in zones which might prove dangerous and you don’t have to keep moving them every so often as well. That is why you absolutely have to ensure the lights are planned out in terms of where they’ll stand. This will make your job a lot easier and in reality it can be easier for your construction work too.

Make Your Lighting Work for You

When you have construction work going on, you have to ensure there is sufficient lighting to keep people safe and to make the job go quicker. Without lighting, things are going to be made far tougher and it’s not what you want. However, with some careful thinking you can easily get the lighting set up and working for you. Have your construction light carefully placed and hopefully there will be enough light for the task ahead.

Proper Lighting For Traffic & Construction Site Safety
Lighting For Traffic

Proper Lighting For Traffic & Construction Site Safety

Traffic lights had a wide range of names such as traffic signals, a stop lights, and so forth. They are set out there to control traffic. The main activity light showed up in the mid-1800s and comprised of two lights, a red one and a green one, similar to what is still utilized today. In those days, they were controlled manually which meant one man sitting there all day to change the settings and keep things moving.Traffic officers would turn the lamp to ensure the correct light was lit. Despite the fact that this technique for control was effective, it didn’t keep going for long. That’s because, after around one year, the light—powered by gas—exploded and it is trusted that the working officer was killed in the blast. Everybody then began questioning the safety of the development, and chose to quit using traffic lights until the mid-twentieth century when an electric option was created. From that point forward, this strategy for traffic lights started spreading all through the world, and can now be seen everywhere there is a road and a car. click here for more details.

Works ought to assume their separate parts towards the arrangement and up keeping of a protected and sound workplace. All staff ought to in this way be acquainted with basic security and have a high-level of well being, so that they can react to any potential accident. They should take sensible care over the safety of themselves, as well as other people influenced by any oversight at work. for more information, visit : http://www.newscaststudio.com/2017/04/28/outsight-focuses-quality-build-rugged-design-led-lights/

Proper Lighting For Traffic & Construction Site Safety

Why are construction lights in the work environment imperative?

From the specialists’ point of view, poor lighting at work can lead to eye‐strain, weariness, headaches and stress. Conversely, too much light can likewise bring about medical issues, such as, “glare” migraines and stress. Both can prompt to botches at work, low quality and low efficiency. Different reviews propose that great lighting at the work environment pays profits as far as enhanced efficiency, and a lessening in mistakes. For instance, in the ILO Manual, Improving Working Conditions and Productivity in the Garment Industry, it demonstrates that enhanced lighting in a few processing plants brought about a 10% expansion in efficiency and a 30% lessening in errors. Changes in lighting doesn’t really imply that you require more lights and in this way utilize greater power – it is regularly an instance of: • improving the use of existing lights; • ensuring that all lights are perfect and in great condition (see underneath); • guaranteeing that lights are situated effectively for each assignment; and • making the best utilization of normal light. Most manufacturing plants have a blend of common and counterfeit lighting. Be that as it may, it gives the idea that little consideration is paid to the sort of work – it is just as all work in the manufacturing plant requires a similar level of lighting.

Straightforward standards for construction light:

  1. Make full use of light in the industrial facility.
  2. Select fitting visual foundations for dividers, roofs, and so on.
  3. Locate the best place for the light source to maintain a strategic distance from glare, etc.
  4. Utilize the most fitting lighting gadgets and apparatuses.
  5. Maintain a strategic distance from shadows.
  6. Guarantee customary cleaning and upkeep of lights and windows.